Squeeze Mortar Grout Pump 10Mpa Pressure Grouting Equipment

Construction Tunnel Used Squeeze Mortar Grouting Pump Stable Pressure

Squeeze Mortar Grouting Pump

Piping Arrangement Method of Squeeze Mortar Grouting Pump:
The correct laying and arrangement of pipes is the prerequisite to ensure failure-free pumping mortar. The following principles should be followed when laying pipes:
1. When choosing the pipeline laying route, shorten the pipeline length as far as possible and reduce the number of turns.
2. Pipes must be installed firmly and reliably, and should be installed in a place easily accessible for easy loading and unloading and maintenance.
3. Horizontal section should not be too long, more than 30m when the inclined line layout as far as possible to avoid mortar precipitation segregation.
4. When using rubber hose transportation, pay attention to the turning radius of the pipe is not less than 1m to ensure smooth pipeline.

Parameters of Squeeze Mortar Grouting Pump:

Working performance of Squeeze Mortar Grouting Pump:

1. Because of full hydraulic pressure, small volume and light weight, it can be used in a wide range of construction.
2. The adjustable performance is better: within the design range, the pressure displacement of the pump can be arbitrarily adjusted. When the pressure exceeds the allowable pressure, the relief valve will automatically open and the cylinder and working cylinder will stop working, thus playing a safe role.
3. In coal mines and other flammable and explosive construction sites, the series of hydraulic grouting motors use explosion-proof motors, but also can be used safely.
4. The anti-seismic pressure gauge is installed in the oil pressure system, which can accurately reflect the working state of the pump.
5. This series of hydraulic grouting pumps can also be used as water pumps, sewage pumps and mud pumps.

Picture of Squeeze Mortar Grouting Pump: